Here is an easy couple h/p gain according to what ive read. Simply go to your local hardware store and get 2, m8x1.25x2" bolts and 2 half inch thick nylon bushings, remove i/c bolts carefuly pick up on i/c just far enough to place the bushings under the i/c mounting brackets and install new bolts. Use caution when closing hood to make sure you have clearance for i/c with hood closed. The best part is it only took about 30 seconds to do takes longer to locate the bolts and bushings in the store than installing them. Good luck to those who try this its not a power adder that is realy noticeable but if you can cool the air going into the motor a little bit more it will help h/p levels especialy when driving around town at low speeds where you notice the most amount of heat soak.

__________________

talk about freeing up more horsepower on a budget. good shit.

__________________