Got anything planned for the near future? - Tuner-Junction

Blake · #1 (**permalink**) May 1st, 2006, 02:14 AM

Just wanting to see what you guys got plans for in the near future. You guys know what i am doing. I wanna know what YOU are doing.

post up. Give us a good explanation so we arent left in the dark. Pictures help too

DCxMagus · #2 (**permalink**) May 1st, 2006, 04:31 AM

Well near near furture is definetly T1r exhuast and F/R strut bars from tanabe.

After that Going to try and find a decently priced USDM OBD1 P72 and Hondata s300 will go into that. Swap over to OBD1 Grab a CF hood to replace my fucked up stock one, HID retrofit for the headlamps and then I have to decide.

I can either A) more bolt ons and minor things Find a JDM H22 and build it up N/A styles like I want

or B) Take everything that I took off my saturn, make new charge piping for the prelude, grab an equal lenght Mani for the H22, then replace my blown turbo's center to on of the new Garret BB centers and turbo the prelude with a low boost setting of 5, high 7 until I can rebuild a motor for turbo then maybe run it at 15 PSI if I want too. I would have a list of things to change around to make my old turbo kit I built for the saturn to fit the prelude but all the main parts are there I got the Wastegate with 5 springs, got the turbo, got fuel management, got the intercooler so it might be a better option for me to just turbo the lude. I just gotta decide LoL

KingMe · #3 (**permalink**) May 1st, 2006, 04:41 AM

well. i was gonna start my swap soon. I just got my JDM front end on today, and an hr later got into a wreck, so im concentrating on fixing her up

sorry forgot good examples. I donno the true extent of the damage just yet. I popped up on a curb backwards and into a chain link fence at about 50mph, so im pretty sure my suspension is gonna be hurting. i need to replace my driver side door, spoiler, possibly rear bumper. 2 rims (one dented up, other broken down the middle) a few tires and definitly a paint job or at least for 70% of the car. but my JDM front end didn' even have a scratch on it. Any suggestions on suspension? whats best for a 4th gen?

noopie · #4 (**permalink**) May 1st, 2006, 04:46 AM

working on appearance things. need to get skirts to finish off the kit and then get it all painted. also shopping for wheels. this hopefully will all happen the next time i get my loan check

more immediately, i'm gonna get my crushed exhaust fixed.

98'Lude · #5 (**permalink**) May 1st, 2006, 09:07 AM

Koni yellows, Suspension Technique sway bars, get my windows tinted, and I've been thinking maybe a new head unit, 12" JL and a custom fiberglass enclosure would be a nice summer project

mlh908 · #6 (**permalink**) May 1st, 2006, 09:23 AM

new exedy stage 1 clutch
new cat
new subwoofer setup

nothin special ... but hopefully all done within this month

Blake · #7 (**permalink**) May 1st, 2006, 12:15 PM

sweet guys!

Cant wait to get some updates

Type_SH RaCer · #8 (**permalink**) May 1st, 2006, 08:06 PM

I'm getting a radius rod for the FR, but have a dum question for ya'll. When they say FR & FL this means from inside the car and not from the outside right? And did you know that they are diffrent from the base models. I will also be getting the bushings for them and new bolts. The car pulls to the right a lil since one day dirving at night with the steats pulled back and watching the world go by, you know shooting the breazes and then make a left a crub jumped in front of me.

Things that are getting done or going too soon:

Valves adjusted
oil change
flush ATTS
Recalabrate ATTS
Pick a tein Flex or SS (don't know if i wanna wate 3weeks for the flex) going in with the rod.
spark plugs

Others:

Blue tooth for phone. I can never hear my phone and if driveing in DC i can use the phone.
Tint front two windows 50% (D*m VA law)
Get dings out from DentMaster (3 of them) It's like $50 a dent.

Best of all is she just got her own parking space in a garage at work!

dark_accord436 · #9 (**permalink**) May 1st, 2006, 08:11 PM

KingMe · #10 (**permalink**) May 1st, 2006, 08:13 PM

booooooo

Quote:

Originally Posted by dark_accord436

F23

DCxMagus · #11 (**permalink**) May 2nd, 2006, 05:47 AM

Change of plans next mod going on is the damn JDM cup holder

After almost spilling my damn soda on me every right turn I am order it right now ROFL

USDM cupholder is the worst designed thing I have ever seen, how could you honda!:mad:

justin · #12 (**permalink**) May 2nd, 2006, 12:16 PM

- Should be installing the body kit this weekend, will probably have the parts back by Thursday.
- Finish wetsanding the driver's side of the car.
- Finish wetsanding my SS header and reinstall it, since I finally got the hole welded.

I'll post up some teaser shots of the kit when I get it on this weekend.

Type_SH RaCer · #13 (**permalink**) May 2nd, 2006, 02:02 PM

Quote:

Originally Posted by DCxMagus

Change of plans next mod going on is the damn JDM cup holder

After almost spilling my damn soda on me every right turn I am order it right now ROFL

USDM cupholder is the worst designed thing I have ever seen, how could you honda!:mad:

I just said that after going to StarBucks today with a co-worker. My center console is coved with coffee from my every morning coffee.

tell me how you like it and if it works wonders.

98'Lude · #14 (**permalink**) May 2nd, 2006, 04:39 PM

Quote:

Originally Posted by Type_SH RaCer

I just said that after going to StarBucks today with a co-worker. My center console is coved with coffee from my every morning coffee.

tell me how you like it and if it works wonders.

Haha one day I brought my friend back some Mcdonalds and his entire large mr pibb ended up inside the cupholder. My cupholder was literally a pool of pibb.

Mkazm83 · #15 (**permalink**) May 4th, 2006, 01:04 AM

Im looking at Tanabe underbraces, still usure if it will compliment the rest of my suspension.

dark_accord436 · #16 (**permalink**) May 4th, 2006, 02:21 AM

Quote:

Originally Posted by KingMe

booooooo

Bro....you ass lol..

sonny · #17 (**permalink**) May 4th, 2006, 05:34 PM

Mahle Gold Series 11.5:1 CR pistons (ordering in 3 weeks)
RMF header

(2-4 weeks)
Apexi N1 (2 months)
JDM Type S cams (2-4 months)
NX 75 wet shot (will be upgraded to 100 progressive direct port system) (aug-sept.)
Darton dry sleeves later in the year (sept.-nov.)
ITB's (jan.-mar.)

hoping to run 13's, but I'm just being modest, I know it'll be probably a 13.5 or better. That's the plan, we'll see how closely I can follow it

Blake · #18 (**permalink**) May 4th, 2006, 06:40 PM

y type S cams?

sonny · #19 (**permalink**) May 9th, 2006, 01:35 AM

Quote:

Originally Posted by Blake

y type S cams?

better duration for nitrous

mlh908 · #20 (**permalink**) May 9th, 2006, 12:39 PM

So i went auto-crossing this weekend...and im hooked. Time to go function over fashion and find some sway-strut bars for the track.