This one goes out for all the DIY'ers that are on the low budget but like the sleepy eyes on their S13.
Step 1:
Go into your 240sx S13. and sit in the drivers seat with a wire cutters and electrical tape with you
Step 2:
Pop out your headlight button (its on the left side of the steering assembly and its a push button)
Step 3:
Look at the wires that are going to the button, and find the brown wire
Step 4:
CUT THE BROWN WIRE
Step 5:
tape over the ends so that the wires aren't open and possibly hot at times
Step 6:
Put the button back into the dash
Step 7:
Try it out
ooooo there lies the next steps on how to use it
1. twist to turn on your headlights
2. Push the button in
3. twist to turn off the headlights ( note the pop ups stay up )
4. push the button and the headlights will start to go down, to stop them from going all the way down push the button again and they will stop moving.
its going to be a quick push to lower and push to stop. if u miss the spot u want just redo the steps. You will get a hang of it!
now enjoy teh american JDM style of the sleepy eyes
or this video will do too
http://video.google.com/videoplay?docid=1432205886411013876&q=s13+sleepy+e yes
Linear Mode
