Simple question, how much do you think I should list my car for? I have a few ideas, but I'm sure my thoughts on what it is worth exceeds it's actual value.

For the most part the mods are in my sig. Every part I have lying around will go with it. Extra set of wheel bearings, Hondata intake manifold thermo gasket, rear quarter panels, extra set of e-brake cables, extra set of SS lines for the rear (if someone decides to go disk), extra konig helium with tire as the spare (because the stock wheels won't fit over the disks in the front). It has its fair share of problems, like it will need new axles, the heater control unit is cracked (and presently removed although the entire heating system is intact). Most joints in the front are new, and maybe the only thing on the rear requiring attention are the trailing arm bushings. LCA's on the rear are ITR arms and fairly new.

I've got to sell, and it has to be fairly soon.

__________________
~Will

88 CRX DX + 97 Spec JDM B18c(R) + some suspension goodies = Lots of fun!

JDM 4.785 final drive, ACT HDSS and Prolite 8lb flywheel, K&N, Kteller 2.5 w/magnaflow, NGK, Distributor King, Fiberimages, Koni, Neuspeed, ST rear 22mm sway bar with ITR LCA's, Konig Heliums, Russel's Brake Lines, Rywire Harness w/JKOBD, Hasport Hydro EFB2 Mounts and Linkage, Phearable.net P28, Full-Race

I have no idea but please post a for sale link when you get an idea. I wish I could buy it but I have too much stuff going on right now. I will pass the info along to my buddy, he has a ITR powered SI and I know he wanted to strip his to make it more light weight. I tmight be better for him to buy yours and work from there.

__________________

You can tell him it loves the track, although I wasn't able to really exploit that fact too well. The night we went to E-town it weighed in at ~1980lbs with 1/4 tank of gas. It has gotten new tires (Azenis) since then so could definitely pull quicker 1/4 times if that's of any interest (13.9 at 103). It was, as you know, built for simplicity and reliability.



Something to think about...

.....off to take pics and create a jazzy FS thread.

__________________
~Will

88 CRX DX + 97 Spec JDM B18c(R) + some suspension goodies = Lots of fun!

JDM 4.785 final drive, ACT HDSS and Prolite 8lb flywheel, K&N, Kteller 2.5 w/magnaflow, NGK, Distributor King, Fiberimages, Koni, Neuspeed, ST rear 22mm sway bar with ITR LCA's, Konig Heliums, Russel's Brake Lines, Rywire Harness w/JKOBD, Hasport Hydro EFB2 Mounts and Linkage, Phearable.net P28, Full-Race

OMFG.....I WANNA BUY IT...BUT MY FUNDS ARE LOW...


I WISH I NEVER SOLD MY CRX AND WANT ANOTHER..LOL WILL SEND ME A EMAIL TRINISKILL@HOTMAIL.COM OR AIM TURBOCHARGEDTNT
SRY FOR THE CAP LOCKS..BUT ITS NEEDED..

__________________
02 psm wrx gt3076r
89 crx HF..SOLD!!!

__________________
~Will

88 CRX DX + 97 Spec JDM B18c(R) + some suspension goodies = Lots of fun!

JDM 4.785 final drive, ACT HDSS and Prolite 8lb flywheel, K&N, Kteller 2.5 w/magnaflow, NGK, Distributor King, Fiberimages, Koni, Neuspeed, ST rear 22mm sway bar with ITR LCA's, Konig Heliums, Russel's Brake Lines, Rywire Harness w/JKOBD, Hasport Hydro EFB2 Mounts and Linkage, Phearable.net P28, Full-Race

Sold.

__________________
~Will

88 CRX DX + 97 Spec JDM B18c(R) + some suspension goodies = Lots of fun!

JDM 4.785 final drive, ACT HDSS and Prolite 8lb flywheel, K&N, Kteller 2.5 w/magnaflow, NGK, Distributor King, Fiberimages, Koni, Neuspeed, ST rear 22mm sway bar with ITR LCA's, Konig Heliums, Russel's Brake Lines, Rywire Harness w/JKOBD, Hasport Hydro EFB2 Mounts and Linkage, Phearable.net P28, Full-Race

so sad.....

__________________

.....indeed.

I still have my bicycles though.

__________________
~Will

88 CRX DX + 97 Spec JDM B18c(R) + some suspension goodies = Lots of fun!

JDM 4.785 final drive, ACT HDSS and Prolite 8lb flywheel, K&N, Kteller 2.5 w/magnaflow, NGK, Distributor King, Fiberimages, Koni, Neuspeed, ST rear 22mm sway bar with ITR LCA's, Konig Heliums, Russel's Brake Lines, Rywire Harness w/JKOBD, Hasport Hydro EFB2 Mounts and Linkage, Phearable.net P28, Full-Race

You know Will it's funny. I think I remember you coming over my house and eyeing out my Trek. I had told you I was big into riding and in 2004 I lost 35lbs in one month riding 20 miles a day. I said since my child came and work heated up I have not been able to enjoy a good ride. I'm pretty sure you were just getting into riding then, if my memory servers me correctly. I'm glad to see you are training and racing, that's much more than I was able to do.

ON a side note I just put my engine back together I still have it on the stand but it's all nice and tidy now. I just need to attach the trans and drop her in. Just in time for the Spring!!

__________________

Glad to hear the engine is still coming along. It's a been a long project of ups and downs, and I'm happy to see it's still progressing.

Didn't you also have a litespeed?? Biking and racing has been lots of healthy fun. I put more miles on my bikes (road and mountain) than I did on my car in the last year. I try to commute as much as I can by bike. I also do team rides sporadically throughout the week. Lots of time on the trainer in the basment also watching spin videos and listening to music. We really do have a very strong bike scene down here in Delaware and we are fortunate to have the sponsors that we have.

BTW, I bought my Fit today and my first aftermarket purchase was my hitch and bike rack. It's a pretty nice car. I'm pretty happy with it so far.

__________________
~Will

88 CRX DX + 97 Spec JDM B18c(R) + some suspension goodies = Lots of fun!

JDM 4.785 final drive, ACT HDSS and Prolite 8lb flywheel, K&N, Kteller 2.5 w/magnaflow, NGK, Distributor King, Fiberimages, Koni, Neuspeed, ST rear 22mm sway bar with ITR LCA's, Konig Heliums, Russel's Brake Lines, Rywire Harness w/JKOBD, Hasport Hydro EFB2 Mounts and Linkage, Phearable.net P28, Full-Race