What's everyone running with?

List your street/autox/hpde/race pads and fluid and any opinions. Thanks!

I just got my Cobalt GT Sports in the mail today along with some ATE superblue. I don't plan on putting them on til June, but it got me thinking about what other people are using.


Me:

Street- Stock Integra non-ITR pads

HPDE - Cobalt GT sports non-ITR pads

I currently use Valvoline Synpower DOT 3/4 and have had no issues on street or Autox.

Switching to ATE Superblue DOT4 in June.

__________________
~Will

88 CRX DX + 97 Spec JDM B18c(R) + some suspension goodies = Lots of fun!

JDM 4.785 final drive, ACT HDSS and Prolite 8lb flywheel, K&N, Kteller 2.5 w/magnaflow, NGK, Distributor King, Fiberimages, Koni, Neuspeed, ST rear 22mm sway bar with ITR LCA's, Konig Heliums, Russel's Brake Lines, Rywire Harness w/JKOBD, Hasport Hydro EFB2 Mounts and Linkage, Phearable.net P28, Full-Race

I'll list the NSX since that's really what I had most mileage on......

Street: Cobalt / Axxis (don't ask me what they were, they're track pads and I bought them from Larry)

Track: See above

Fluid: ATE Superblue (only way to go!!)



CRX.......

I thought Fastbrakes gave me track pads but after my Pocono session I realized they're not (I melted the pads and messed up my rotors)

Fluid: ATE Superblue

This season I plan on running Cobalts because they were absolutely incredible on the NSX. I run track pads on the street as well, I'm just careful to make sure I get enough heat in them before I drive aggressively.

__________________

i am running whatever brake fluid was in the shop last time i did my brakes

and i am running the cheapest pads i could get

__________________

I got the premium pads from napa yesterday. Fully metalic i think. And i've just got the normal prestone dot-3 fluid.

__________________
James C.


Check my vB garage