|
Two years later....I was thinking it was the ecu that was throwing the code 9(i was also getting a code for the map sensor over 11lbs, even though I had a 3bar and was chipped for it)So when I took it to have the hondata installed and tuned it took care of the map sensor but not the code 9 for the dizzy. So I got in the mail yesterday my new OEM dizzy and conversion harness and like magic ITS FIXED! Just thought Id update incase anyone searches a code 9 problem. So I dont know if it was the aftermarket distributor or if I pinned the connector wrong...Ill try hooking up the other dizzy(it has a seperate coil pack)and see if It was the wiring(ill pin it according to the conversion harness).
__________________
B18 Block with a B16 Head with a Skunk2 Intake Manifold and a 68mm throttle body
Eagle Rods with CP 9:1 pistons Fueled by Precision 1000cc Injectors and a Hondata s200
Full-Race Manifold attached to a t3/60-1 Turbo
ACT 6 puck sprung clutch and an ACT 12lb flywheel
Quaife LSD spinning some 205/60/14 BF Drag Radials Held down by a Full-Race Traction Bar
|